Below are custom arrow builds. These builds may void manufacture warranty. See bottom of Page or lighted nock prices.

To order 856-457-9627 or email vitallimits@gmail.com

BE Brass 1.jpg

Black Eagle with Reverse taper brass insert only

.001 Straightness in 20-22 inches
1 doz $149.95 plus shipping
1/2 doz $84.95 plus shipping.
Custom Color vanes add $5.00

Shipping can vary, but typically $15 for up to 2 doz in lower US 48 states.

Be sure to specify nock type or vane set back when ordering.

Black Eagle Build with Brass Concept 1.0 system — Black Eagle Build with Brass Concept 1.0 system

BE 2.jpg

Black Eagle Custom Build with Aero Concept Brass 1.0 System

.001 Straightness
1 doz $174.95 plus shipping
1/2 doz $89.95 plus shipping.
Custom Color vanes add $5.00

All builds are spine located, Aero Vane II or III option, Firenock nock ( unlit ).

Black Eagle Bolts.jpg

Black Eagle Zombie Slayer .001 20-22 inch option AV2 or AV3 vanes options, Firenock 55gn Stainless Steel double shoulder insert with 6 inch concept inner tube. Firenock nock ( un-lit )
Custom Color vanes add $5.00

$195.00 per dozen.

U nock 3 (1).jpg

Nock selection guide. If you do not see your spec please contact us
856-457-9627 or email vitallimits@gmail.com

F=> Flat nock, Fit: Excalibur, older ten Point
M=> Moon Nock, most crossbow, Barnett
V=> 0.115" Serving OD, Tradition nock design, Fit:Vertical cross
C=> 0.125" Serving OD, patented short and stubbydesign, Fit: Bowtech,
U=> 0.135" Serving OD, patented short and stubby design
Q=> 0.145" Serving OD, longer prong design Fit: Parker and Scorpyd Crossbow
J=> 0.155" Serving OD, patented short and stubby design Fit: Newer Ten Point, Horton, Wicker Ridge, Mathews (except the 400 fps)
D2=> 0.165" Serving OD, longer prong design Fit: PSE Tac, Jensing Devastator

To add Lit functions to custom build is $21 per bolt extra. Includes Battery, End cap ( installed by shop ), circuits )

To add End cap to any bolts is $5.00 per bolt extra.
( End caps are installed in bolt to keep battery or weight from coming out of nock )

To add weight kit to bolt to match lit circuit weight is $5.00 per bolt extra. ( must have end cap installed, weight can be removed to install lit functions. )